Ubuntu EE CPU Installation With Apt
Note | MapD has been rebranded to OmniSci. |
This is an end-to-end recipe for installing OmniSci Enterprise Edition on an Ubuntu machine running without GPUs. This install has all of the functionality of OmniSci, except for backend rendering (Pointmap, Scatterplot, and other charts might not be available.)
This is a quick video overview of the installation process.
- The installation phases are:
Important | The order of these instructions is significant. To avoid problems, install each component in the order presented. |
Assumptions
- These instructions assume the following:
- You are installing on a “clean” Ubuntu host machine with only the operating system installed.
- Your OmniSci host only runs the daemons and services required to support OmniSci.
- Your OmniSci host is connected to the Internet.
Preparation
Prepare your Ubuntu machine by updating your system, creating the OmniSci user, and enabling a firewall.
Update and Reboot
Update the entire system.
sudo apt update
sudo apt upgrade
Verify that the apt-transport-https
utility is installed
sudo apt install apt-transport-https
Reboot to activate the latest kernel.
sudo reboot
Create the OmniSci User
Create a group called mapd
and a user named mapd
, who will be the owner of the OmniSci database. You can create both the group and user with the useradd
command and the -U
switch.
sudo useradd -U mapd
Firewall
To use Immerse, you must prepare your host machine to accept HTTP connections. You can configure your firewall for external access.
sudo ufw disable
sudo ufw allow 9092/tcp
sudo ufw allow ssh
sudo ufw enable
For more information, see https://help.ubuntu.com/lts/serverguide/firewall.html.
Installation
If necessary, install the curl
command.
sudo apt install curl
To install OmniSci:
In a web browser, download the OmniSci list file
https://releases.mapd.com/ee/mapd-ee-cpu.list
. You might be prompted for the user name and password provided by your OmniSci sales representative.Move and rename the file to
/etc/apt/sources.list.d/mapd.list
.Edit the
mapd.list
file, replacinguser:pass
with the name and password provided by your OmniSci sales representative.deb https://user:pass@releases.mapd.com/ee/apt/ stable cpu
Download and add a GPG key to apt.
curl https://releases.mapd.com/GPG-KEY-mapd | sudo apt-key add -
Use
update
to locate the new installation options, theninstall
OmniSci.sudo apt update sudo apt install mapd
Configuration
These are the steps to prepare your OmniSci environment.
Set Environment Variables
For convenience, you can update .bashrc with the required environment variables.
- Open a terminal window.
- Enter
cd ~/
to go to your home directory. - Open
.bashrc
in a text editor. For example,sudo gedit .bashrc
. - Edit the
.bashrc
file. Add the following export commands under “User specific aliases and functions.”# User specific aliases and functions export MAPD_USER=mapd export MAPD_GROUP=mapd export MAPD_STORAGE=/var/lib/mapd export MAPD_PATH=/opt/mapd export MAPD_LOG=/var/lib/mapd/data/mapd_log
- Save the
.bashrc
file. - Open a new terminal window to use your changes.
The $MAPD_STORAGE directory must be dedicated to OmniSci: do not set it to a directory shared by other packages.
You can also create a configuration file with optional settings. See Configuration.
Initialization
This step initializes the database and prepares systemd
commands for OmniSci.
Run the
systemd
installer. This script requiressudo
access. You might be prompted for a password. Accept the values provided (based on your environment variables) or make changes as needed. The script creates a data directory in $MAPD_STORAGE with the directoriesmapd_catalogs
,mapd_data
, andmapd_export
.mapd_import
andmapd_log
directories are created when you insert data the first time. Themapd_log
directory is the one of most interest to a OmniSci administrator.cd $MAPD_PATH/systemd sudo ./install_mapd_systemd.sh
Activation
Start and use OmniSci Core and Immerse.
Start OmniSci Core
cd $MAPD_PATH sudo systemctl start mapd_server sudo systemctl start mapd_web_server
Enable OmniSci Core to start when the system reboots.
sudo systemctl enable mapd_server sudo systemctl enable mapd_web_server
Checkpoint
To verify that all systems are go, load some sample data, perform a mapdql
query, and generate a Table chart using Immerse.
OmniSci ships with two sample datasets of airline flight information collected in 2008. To install the sample data, run the following command.
cd $MAPD_PATH
./insert_sample_data
When prompted, choose whether to insert dataset 1 (7 million rows) or dataset 2 (10 thousand rows). The examples below use the smaller 10 thousand row dataset.
Enter dataset number to download, or 'q' to quit:
# Dataset Rows Table Name File Name
1) Flights (2008) 7M flights_2008_7M flights_2008_7M.tar.gz
2) Flights (2008) 10k flights_2008_10k flights_2008_10k.tar.gz
Connect to OmniSci Core by entering the following command in a terminal on the host machine (default password is HyperInteractive):
$MAPD_PATH/bin/mapdql
password: ••••••••••••••••
Enter a SQL query such as the following:
mapdql> SELECT origin_city AS "Origin", dest_city AS "Destination", AVG(airtime) AS
"Average Airtime" FROM flights_2008_10k WHERE distance < 175 GROUP BY origin_city,
dest_city;
The results should be similar to the results below.
Origin|Destination|Average Airtime
Austin|Houston|33.055556
Norfolk|Baltimore|36.071429
Ft. Myers|Orlando|28.666667
Orlando|Ft. Myers|32.583333
Houston|Austin|29.611111
Baltimore|Norfolk|31.714286
Connect to Immerse using a web browser connected to your host machine on port 9092. For example, http://omnisci.mycompany.com:9092
.
Create a new dashboard and a Table chart.
- Click New Dashboard.
- Click Add Chart. Table is the default chart type.
- Click Add Data Source.
- Choose the flights_2008_10k table as the datasource.
- Click Add Measure.
- Choose depdelay.
- Click Add Measure.
- Choose arrdelay.
The resulting chart shows, unsurprisingly, that there is a correlation between departure delay and arrival delay.